When it comes to mountain bike selection and expert advice, you can always check with the bike shop employee or seller so you can get fitted for the right sized bike. So, yes, size does matter because you will suffer in the long run if you buy a bike that it either too small or too big. You just will not enjoy it. It’s like riding a motorcycle and when you come to a stop, you can’t touch ground with your feet. Thus, leaning it over. Follow the tips for the perfect mountain bike fit.
Stand-over height is when you check the fitting yourself, the first thing you want to check is the inseam clearance, or the stand-over height. You want to have enough room between youand the top tube when you come to a stop. There should be around four to six inches of clearance from the top of your inseam to the top of the top tube.
Leg and feet position. Here’s the formula for determining the leg position for riding a mountain bike. When riding a mountain bike, the terrain constantly changes which raises you off the seat almost all the time, sometimes just slightly, other times completely off.
Hence, you'll need to sit your saddle slightly lower than you would on any other type of bike. Be sure you take this slightly lower seat height position into effect when you factor the size of the frame.
The next thing you'll want to check is the rider compartment space which is the distance between the saddle and the handlebars. Once the proper leg extension has been determined, be sure the handlebar is one to two inches below the height of the saddle. You should never have the handlebars higher than the seat, unless there is some type of upper body problem.
Dual Suspension Bikes is a mountain bike with suspensions at both ends, you'll want your weight more in the middle of the bike so that your weight is distributed evenly between the front and rear suspensions, thus allowing the front and rear suspension to work as a complete unit.
This can be done quite easily by using a higher or shorter stem to raise the hand height, which will in turn move the upper body up and the weight towards the rear. The increase in rise shouldn't be no more than two inches, then the decrease in reach shouldn't be any more than two inches.
When in doubt, and you believe you have accounted for all these measures, go test drive the bike. Make sure you wear a helmet, even if you are going to be testing for a brief period of time. Be sure that the tires are set to the right pressure, and the shop has adjusted the bike for you properly.
Have a shop employee or counterpart observe your body position and ride height while riding, to determine is any further adjustments need to be made. Ride the bike around for a bit to get used to its handling and new equipment. Start off slowly, then give the bike a test to see if does what you want it to do.
This is when you might notice that something isn't working correctly or just doesn't feel like the right fit. If this happens, go back to the shop for adjustments before ruling anything out.
The more you ride a mountain bike, the easier it will be to tell the difference in the ride types. This is when it makes it easier to buy a mountain bike online. You already know what you’re looking for. Keep in mind, it may take months and even years to appreciate the way a bike handles. For further advice, you can always ask the seller or bike shop what they like about the bike or what they ride. The more you ask, the more you will know which helps you find a better deal when shopping around.